The news is by your side.

What is the Best Way to Waterproof a Basement?

0

Waterproofing is the process of making a structure water-resistant or waterproof. If you deal with a leaking basement, this can be quite frustrating for you. A leaky basement can give rise to many other problems. In such a case, your priority should be finding a solution for this problem to save your house’s structure and worth. Basement waterproofing conceals the leaking walls and basement floor. Waterproofing is an economical process that can protect your home from further damage.

Ways to waterproof a basement

There are multiple ways to waterproof a basement. Every method is helpful and tested, yet the method’s effectiveness depends on the root cause of leakage and the location of the house. So, here are some ways to keep your basement clean, dry, and waterproofed. 

Sump pump system and drainage channel

Installing a sump pump and drainage system in the basement is an effective way to restrict flooding. It helps in keeping the basement dry. To install a sump pump, contact a waterproofing professional. Following this method will help save the house from molds, structural damage, and bad air quality problems.

Epoxy injections and sealants 

Epoxy injections and sealants are cheaper than sump pump systems. So many people who can not afford a drainage system go for epoxy injections and sealants. These are known as Masonry products. These products are applied on the walls and floor, especially in the places where cracks and gaps are present.

Avoid using sealants over paints because it reduces the effectiveness of the sealant. On the other hand, there is an issue with epoxy injections that they can crack with the contraction and expansion of the wall. So, it is better to install a drainage system against flooding.

Interior Drainage

Interior drainage so far is the best way to save your basement. Interior drainage is also known as the French drain system. It is suitable for most homes. It is budget-friendly and less troublesome, like exterior excavation. The process works by digging a trench through the interior perimeter of the basement floor. The next step is installing a sump pump and a drain inside the floor. So it can move the water away from home.

Exterior waterproofing

In this process, waterproofing is done outside the foundation. In exterior waterproofing, usually, the professional coats polymers and membranes to the exterior walls. Then the professional places a trench drain or a combination of both methods. Exterior waterproofing can be the most effective process if the process is carried out correctly. This process is costly, time-consuming, and sometimes dangerous as well. Exterior waterproofing might clog, which can cause flooding in the basement.

The best way to choose the most effective Sioux Falls basement waterproofing method is to contact a professional and make a proper solution plan for your issue. The selection of the process also depends upon the seriousness of the problem. It depends on the fact whether the homeowner wants a permanent solution or a temporary one.

Leave A Reply

Your email address will not be published.